Lenovo Gemplus 41N3005, User Manual

Page: 11 / 42

Chapter 2. Installation
This chapter provides instructions for installing the Gem
p
lus GemPC Smart Card
Reader from Lenovo and the Gem
p
lus SmartDiag diagnostic tool. This chapter also
includes instructions on updating the device driver.
Installing the Gem
p
lus GemPC Smart Card reader writer
This section contains instructions for installing the Gem
p
lus GemPC smart card
reader writer for Microsoft Windows XP and Microsoft Windows 2000 Professional.
Note: To verify if newer versions of this installation software are available, visit
the Lenovo Web site at http://www.lenovo.com/think/support for the latest
software and documentation.
Windows XP and Windows 2000
To install the Gem
p
lus GemPC smart card reader writer for Windows XP or
Windows 2000, complete the following procedure:
1. Insert the CD for the Gem
p
lus GemPC Smart Card Reader from Lenovo that
comes with your option in the computer.
2.
After inserting the CD, the User’s Guide Software CD screen automatically
opens. On the left side of the screen, click
Software
.
3. Click on Install Device Drivers. The Gem
p
lus GemPC Smart Card Reader
Installer Window will pop up.
4. Click Next .
5. Read through the End User Licensing Agreement and if you agree with the
terms and conditions of the agreement, select
″
I accept the terms in the
agreement
″
, and click Next .
6. Choose an install directory and click Next .
7. Click Finish .
8. Insert the Gem
p
lus GemPC Smart Card Reader from Lenovo in your computer,
(As shown below).
Sma
rt
Read
er
Car
d
9.
Your option is ready for use.
For information on the Gem
p
lus SmartDiag diagnostic tool, see “Installing and
using the Gem
p
lus SmartDiag diagnostic tool” on page 4.
© Lenovo 2005. Portions © IBM Corp. 2003.
3