48
Figure 32
Removing a disk drive module
Installing a disk drive module
1.
Follow
one
of the two sub-steps below, according to your product disk drive module type:
a.
SFF disk — Squeeze the latch release flanges together, and then pull the latch, rotating it upward
until it is fully open (see
on page 47 and
).
b.
LFF disk — No action required.
Proceed to
below.
2.
Follow
one
of the two sub-steps below, according to your product disk drive module type:
a.
SFF disk — With the LEDs oriented to the bottom, slide the disk drive module into the drive slot as
far as it will go (see left illustration in
).
b.
LFF disk — With the LEDs oriented to the left, slide the disk drive module into the drive slot as far as
it will go (see right illustration in
Figure 33
Installing a disk drive module
3.
Follow
one
of the two sub-steps below, according to your product’s disk drive type:
a.
SFF disk — Rotate the latch downward until it clicks closed to firmly seat the disk drive module in the
enclosure midplane.
b.
LFF disk — Verify that you have inserted the disk drive module into the slot as far as it will go, to
ensure that the module is firmly seated in the enclosure midplane.
The installed disk drive module should now appear as shown in
Extract SFF disk or blank
Extract LFF disk or blank
Insert SFF disk or blank
Insert LFF disk or blank
