E-3
USER CONTROLS AND INDICATORS
1. Press " " button to select control parameters in
sequence as belows
Sequence
1
Contrast
Sequence
2
Brightness
Sequence
3
Horizontal Size
Sequence
4
Horizontal Position
Sequence
5
Vertical Size
Sequence
6
Vertical Centering
Sequence
7
Pincushion/Barrel
Sequence
8
Trapezoid
Then repeat from sequence 1.
Keeping on pressing button continually, the
sequence will repeat automatically.
2. Push “+” or “-” button to adjust the value of the
selected function. When the control value reach
the maximum value (either positive or negative)
the LED will flash, indicating that no more
adjustment value is possible.
RECALL
SE LE CT
DEG
3. The “Recall” function is activated by pressing “+”
and “-” buttons at the same time.
4. The manual “Degaussing” function enables user
to clear the picture impurity caused by monitor
position/ orientation change.
When adjustments have been done, all data will be
stored into system memory immediately.
