7.
Using your fingers, move the retaining clips away from the CIOv card; then, lift
the card vertically out of the connector.
Installing a 10Gb interposer card
Use these instructions to install a 10Gb interposer card in the blade server.
To install a 10Gb interposer card, complete the following steps:
1.
Before you begin, read “Safety” on page v and “Installation guidelines” on
page 17.
2.
If the blade server is installed in a BladeCenter unit, remove it (see
“Removing the blade server from the BladeCenter unit” on page 20 for
instructions).
3.
Carefully lay the blade server on a flat, static-protective surface.
4.
Open the blade server cover (see “Removing the blade server cover” on page
21 for instructions).
5.
Locate the blade server interposer card connector (see “Blade server
connectors” on page 15).
6.
If a horizontal-combination-form-factor (CFFh) expansion card is installed on
the expansion connector, remove it (see “Removing a horizontal-compact-
form-factor expansion card” on page 40).
7.
Touch the static-protective package that contains the interposer card to any
unpainted metal surface on the BladeCenter unit or any unpainted metal surface
on any other grounded rack component; then, remove the interposer card
from the package.
8.
Rotate the expansion-card standoffs to the open position.
9.
Align the connector on the interposer card with the connector on the system
board; then, press the interposer card into the connector.
10.
Firmly press on the indicated locations to seat the interposer card.
Chapter 3. Installing options
43
Summary of Contents for BladeCenter HS23
