Lenovo 90H9 Hardware Maintenance Manual Download Page 49 | Manualshive

Page: 49 / 72

background image

Step 7. To install the new microprocessor fan assembly:

a. Line up the new microprocessor fan assembly with the heat-sink and

secure it to the heat-sink with 4 screws.

b. Connect the microprocessor fan power cable to the connector on the

board.

Step 8. Reattach the computer cover.

Replacing the rear system fan

To replace the system fan:

Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives,

shut down the operating system, and turn off the computer and all
attached devices.

Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power

cords, input/output (I/O) cables, and any other cables that are connected
to the computer. Refer to “Left and right view” and “Rear view” for help
with locating the various connectors.

Chapter 8. Replacing hardware

43

«
...
47
48
49
50
51
...
»

Summary of Contents for 90H9









































































Reviews:

No comments

Related manuals for 90H9

83135CU - NetVista A30 - 8313

Brand: IBM Pages: 54

Brand: IBASE Technology Pages: 58

Brand: Vivo Pages: 3

Brand: HP Pages: 101

Brand: HP Pages: 77

133756-004 - Deskpro EN - 6550 Model 6400

Brand: HP Pages: 70

Brand: HP Pages: 105

Brand: HP Pages: 16

Brand: HP Pages: 128

Brand: HP Pages: 24

Brand: HP Pages: 88

127507-008 - Deskpro EP - 64 MB RAM

Brand: HP Pages: 28

Brand: HP Pages: 101

Brand: HP Pages: 6

Brand: Toshiba Pages: 8

TLCS-900 Family

Brand: Toshiba Pages: 751

Brand: Western Digital Pages: 2

Brand: Pelsue Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands