Lenovo 82K8002YGE-FL Hardware Maintenance Manual Download Page 44 | Manualshive

Page: 44 / 68

Lenovo 82K8002YGE-FL Hardware Maintenance Manual Download Page 44

Remove the fans

Make sure the following FRUs (or CRUs) have been removed.

“Remove the lower case” on page 30

“Remove the memory module mylar” on page 35

“Remove the heat sink” on page 37

Step 1. Disconnect the fan cables from the system board. Remove four screws and then remove the fans.

Figure 17. Remove four screws and remove the fans

Screw specifications

Number of screws

M2 x L3.5

4

Go to

https://support.lenovo.com/partslookup

to look up the Lenovo part number of the following replacement

part:

Fans

Remove the solid-state drive (SSD) bracket

Make sure the following FRUs (or CRUs) have been removed.

“Remove the lower case” on page 30

“Remove the memory module mylar” on page 35

“Remove the heat sink” on page 37

Step 1. Remove the right fan and one SSD.

Note:

For details, see “Remove the fans” on page 38 and “Remove the solid-state drive (SSD)

module” on page 31.

Step 2. Remove one screw and then remove the SSD bracket.

38

Hardware Maintenance Manual

«
...
42
43
44
45
46
...
»

Summary of Contents for 82K8002YGE-FL





































































Reviews:

No comments