Lenovo 828747F, User Manual

Page: 28 / 70

6. Some models have an optional hard disk drive mounting bracket
1
installed.
When this bracket is installed, access to some of the components inside the
chassis is restricted.
Note: There appears to be two drive bays in the bracket. However, due to
thermal restrictions, only the bay
2
at the rear of the chassis can be
used to install a hard disk drive.
See “Pivoting or removing the optional hard disk drive mounting bracket.”
Pivoting or removing the optional hard disk drive mounting bracket
The optional hard disk drive mounting bracket can easily be pivoted upward or
removed if necessary to enable replacement of some CRUs and FRUs.
To pivot the optional hard disk drive bracket upward, pull outward at the bottom
of the bracket.
Note: You might have to disconnect the cables attached to the optional hard disk
drive.
12
User Guide