Chapter 2� 2-4
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD�
InputSignal: HDMI
Q27q-1L
2560x1440
Brightness
Contrast
DCR
DisplayMode
Scaling
OverDrive
To use the controls:
1� Press to open the main OSD menu�
2� Use or to move among the icons� Select an icon and press to access the selected
function� If there is a sub-menu, you can move between options using or , then press to
select that function� Use or to make adjustments then press to save�
3� Press
to move backwards through the sub-menus and exit from the OSD�
4� Press and hold for 10 seconds to lock the OSD� This will prevent accidental adjustments to
the OSD� Press and hold for 10 seconds to unlock the OSD and allow adjustments to the
OSD�
5�
Enables DDC/CI by default. Use OSD Exit Key, Press and hold
for 10 seconds to disable/
enable DDC/CI function� A message "DDC/CI disable" is shown on the screen�
