Chapter 1 Get started with your monitor 1-3
Set up the monitor
This section provides information to help you set up your monitor.
Connecting and turning on your monitor
Note:
Be sure to read the Safety Information located in the Flyer before carrying out this procedure.
1.
Power off your computer and all attached devices, and unplug the computer power cord.
2.
Connect the cables according to below icon indication.
Input Connectors
(Rear view):
1 x HDMI 2.0 (HDCP 2.2)
1 x DisplayPort 1.4 (HDCP 2.2)
1 x Thunderbolt
™
4 (full function downstream port with 27W PD output)
1 x Thunderbolt
™
4 (full function upstream port with typical 65W PD output)
1 x USB 3.2 Gen 1 Type-B (upstream)
3 x USB 3.2 Gen 1 Type-A (downstream) - Support eKVM by dedicated USB port
1 x RJ-45 (10M/100M/1G)
