Lenovo 5594-5KX, Installation And User Manual

Page: 28 / 88

Operation status Cause Description
High Efficiency mode
The UPS is operating on
High Efficiency mode. The UPS is powering and
protecting the equipment.
Bypass mode
An overload or a fault has
occurred or a command has
been received, and the UPS
is in Bypass mode. Equipment is powered but
not protected by the UPS.
Display functions
Press the Enter ( ) button to activate the menu options. Use the two middle
buttons ( and ) to scroll through the menu structure. Press the Enter ( )
button to select an option. Press the button to cancel or return to the previous
menu.
Main menu Submenu Display information or Menu function
Measurements [Load] W VA A pf / [Input/Bypass] V Hz
/ [Output/Efficiency] V Hz / [Battery] %
min V n° / [DCbus] V / [Average power
usage] Wh / [Cumulat. power usage] Wh
since date
Control Go to Bypass Transfers the UPS on Bypass mode
Start battery test Starts a manual battery test
Reset fault state Clears active fault
Restore factory settings Returns all settings to original values
Reset average power Clears power usage measurements
Reset cumul. power Clears cumulated power usage
measurement
Dry contacts test Tests dry contact relay outputs
Settings Local settings Sets product general parameters
In/Out settings Sets output parameters
On/Off settings Sets On/Off conditions
Battery settings Sets battery configuration
Event log Event filter Selects faults, alarms and/or events to
display
Event list Displays the events stored
Reset event list Clears events
Fault log Fault list Displays event log or alarms
Identification [Product type/model] / [Part/Serial
number] / [UPS/NMC firmware] / [Com
card IPv4], [Com card IPv6], [Com card
MAC] / [Detected accessories]
10
Installation and User's Guide