manualshive.com logo in svg

Lenovo 5000 Series, User Manual, Page: 23 / 80

Share
Download
Lenovo 5000 Series User Manual Download Page 23

11

Lenovo 5000 Series User Manual

Please Note:

1. To avoid electromagnetic disturbance in the monitor don’t place the speakers too close to the

monitor.

2. Please tighten the screws on the monitor signal cable.
3. If the model you bought is not equipped with the independent display card, please connect the

monitor cable to the connector of the VGA display connector.

1.5 Connecting and using the flying shuttle box

1.5.1 Used with internet chat talking device

The built-in speaker and microphone on the monitor base enable you to directly communicate with others by

voice when using 

internet chat

 software.

Please Note:

1. Please use the USB cable, that is packaged with the monitor, to connect the base shuttle to the

computer as shown in the following figure.

2. You must use the power adapter and power cord , that is packaged with the monitor to connect

them to the power supply as shown in the following figure.

3. Use the switch on the back of the monitor to power it on.

Connect to the USB of the computer

Speaker

flying shuttle box

The monitor adjustment

The monitor 
power switch

Adapter

Summary of Contents for 5000 Series

















































































Reviews:

No comments