Lenovo 41N3040 - Gemplus GemPC USB Smart Card Reader, User Manual

Page: 10 / 44

8. Connect the Gemplus GemPC USB Smart Card Reader from Lenovo to your
computer, (As shown below).
9. Your option is ready for use.
For information on the Gemplus SmartDiag diagnostic tool, see “Installing and
using the Gemplus SmartDiag diagnostic tool.”
Installing and using the Gemplus SmartDiag diagnostic tool
The Gemplus SmartDiag diagnostic tool reports software or hardware problems
and provide troubleshooting information. If the displayed information does not
solve the problem, you can generate a diagnostic report for technical support.
The diagnostic tool verifies the availability of the following:
v
Operating system services that support smart cards
v
Smart card reader
v
Smart cards
To install the Gemplus SmartDiag diagnostic tool, complete the following
procedure:
1. Connect the Gemplus GemPC USB Smart Card Reader from Lenovo CD into the
CD-ROM drive.
2. From the computer desktop, click Start → Run .
3. In the Open: field, type
d:\smartdiag\setup
, where d is the CD-ROM drive.
4.
Click
OK
.
5. Follow the instructions on the screen to continue the installation.
To start the diagnostic tool, click Start
→
Programs
→
Gemplus
→
SmartDiag
→
SmartDiag .
Note: To view the Help documentation for the diagnostic tool, click Start
→
Programs
→
Gemplus
→
SmartDiag
→
SmartDiag
→
Help .
4
Gemplus GemPC USB Smart Card Reader from Lenovo User’s Guide