Lenovo 3246A2U User Manual Download Page 67

Page: 67 / 92

Enabling or disabling a device

This section provides information on how to enable or disable user access to the
following devices:

USB Setup

Use this option to enable or disable a USB connector. When a USB
connector is disabled, the device connected to the USB connector
cannot be used.

SATA Controller

When this feature is set to

Disable

, all devices connected to the

SATA connectors (such as hard disk drives or the optical drive)
are disabled and cannot be accessed.

External SATA Port

When this option is set to

Disable

, the device connected to the

External SATA connector cannot be accessed.

To enable or disable a device, do the following:

Start the Setup Utility program. See “Starting the Setup Utility program” on
page 57.

From the Setup Utility program main menu, select

Devices

Depending on the device you want to enable or disable, do one of the
following:

Select

USB Setup

to enable or disable a USB device.

Select

ATA Drive Setup

to enable or disable an internal or external SATA

device.

Select the desired settings and press Enter.

Press F10 to save and exit the Setup Utility program. See “Exiting from the
Setup Utility program” on page 60.

Selecting a startup device

If your computer does not start up from a device such as the disc, diskette, or hard
disk drive as expected, do one of the following to select the startup device you
want.

Selecting a temporary startup device

Use this procedure to select a temporary startup device.

Note:

Not all discs, hard disk drives, and diskettes are bootable.

Turn off your computer.

Repeatedly press and release the F12 key when turning on the computer. When
the Please select boot device window displays, release the F12 key.

Select the desired startup device and press Enter. The computer will start up
from the device you selected.

Note:

Selecting a startup device from the Please select boot device window does
not permanently change the startup sequence.

Chapter 4. Using the Setup Utility program

Summary of Contents for 3246A2U





























































































Search results

Summary of Contents for 3246A2U

Reviews:

Related manuals for 3246A2U

Brands by name

Popular brands

Lenovo 3246A2U, User Manual

Search results

Summary of Contents for 3246A2U

Reviews:

Related manuals for 3246A2U

Brands by name

Popular brands