28
Chapter 2. Using Your Computer
Changing or Removing the User Password
To change the password, do the following:
1
Select
Set User Password
, and press the
Enter
key. The Set User
Password window opens.
2
Choose your user password, which can be from one to eight
alphanumeric characters in any combination. Type the correct
password in the
Enter Current Password
field. Press
Enter
key once to
move to the
Enter New Password
field, then type in a new user
password in.
3
Press the
Enter
key once to move to the
Confirm New Password
field.
Retype the password you just entered to verify it.
4
Commit your password to memory, and press the
Enter
key.
To remove the password, do the following:
1
Select
Set User Password
, and press the
Enter
key.
2
Type the correct user password in
Enter Current Password
, and finally
press the
Enter
key thrice.
Note
:
Make sure
Password on boot
is set to
Enabled
if you desire password
protection at power on.
Lenovo 3000 N500 UG V1.0_en.book Page 28 Monday, September 1, 2008 9:44 AM