Chapter 2. Using Your Computer
27
Changing or Removing the Supervisor Password
To change the password, do the following:
1
Select
Set Supervisor Password
, and press the
Enter
key. The Set
Supervisor Password window opens.
2
Select
Enter Current Password
and type in the correct password. Then
press the
Enter
key once to move to the
Enter New Password
field,
type in a new supervisor password.
3
Press the
Enter
key once to move to the
Confirm New Password
field.
Retype the password you just entered to verify it.
4
Commit your password to memory, and press the
Enter
key.
To remove password, do the following:
1
Select
Set Supervisor Password
, and press the
Enter
key.
2
Select
Enter Current Password
and type in the correct password, and
finally press the
Enter
key thrice.
Note:
Make sure
Password on boot
is set to
Enabled
if you desire password
protection at power on.
Lenovo G230 UG V1.0_en.book Page 27 Monday, July 28, 2008 7:29 PM