26
Chapter 2. Using Your Computer
Hard disk drive (HDD) password
Once an HDD password is set, you will need to enter it in order to access
the hard disk.
You can set the HDD password with
Primary Hard Disk Password
in
Security
.
To Set a Supervisor Password:
Only a system administrator will be able to perform this procedure.
1
Turn on your computer. Press
F2
, while the initial screen is displayed.
The InsydeH2O Setup Utility screen opens.
2
Select
Security,
using the cursor directional keys.
3
Select
Set Supervisor Password
, and press the
Enter
key. The Set
Supervisor Password window opens.
4
Choose your Supervisor password, which can be from two to eight
alphanumeric characters in any combination. Type it in the
Enter New
Password
field.
5
Press the
Enter
key once to move to the
Confirm New Password
field.
Retype the password you just entered to verify it.
6
Commit your password to memory, and press the
Enter
key.
7
Press
F10
to exit.
8
Select
Yes
in the “Exit Saving Changes” window.
Lenovo G230 UG V1.0_en.book Page 26 Monday, July 28, 2008 7:29 PM