Lenovo 20N4 Hardware Maintenance Manual Download Page 75

Page: 75 / 111

Note: When installing:

Ensure that the connector is attached firmly.

1040 M.2 solid-state drive

For access, remove these FRUs:
• “1010 Removing the nano-SIM card and the nano-SIM-card tray” on page 64
• “1020 Base cover assembly” on page 64

Attention:

• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper

handling can cause damage and permanent loss of data.

• Before removing the drive, have the user make a backup copy of all the information on it if possible.

• Never remove the drive while the system is operating or in suspend mode.

If your computer is installed with a hybrid solid-state drive (with Intel Optane memory), go to

https://

support.lenovo.com/docs/tg_ssd

to know the details on how to replace it.

Removal steps of the 2282 M.2 solid-state drive

Chapter 8

Removing or replacing a FRU

Summary of Contents for 20N4
















































































































Search results

Summary of Contents for 20N4

Reviews:

Related manuals for 20N4

Brands by name

Popular brands

Lenovo 20N4, Hardware Maintenance Manual

Search results

Summary of Contents for 20N4

Reviews:

Related manuals for 20N4

Brands by name

Popular brands