background image

DANGER

Observe the following precautions when working on or around your IT rack system: 

•  Heavy equipment—personal injury or equipment damage might result if mishandled.

•  Always lower the leveling pads on the rack cabinet.

•  Always install stabilizer brackets on the rack cabinet.

•  To avoid hazardous conditions due to uneven mechanical loading, always install the heaviest 

devices in the bottom of the rack cabinet. Always install servers and optional devices starting 
from the bottom of the rack cabinet.

•  Rack-mounted devices are not to be used as shelves or work spaces. Do not place objects on 

top of rack-mounted devices.  

•  Each rack cabinet might have more than one power cord. Be sure to disconnect all power cords 

in the rack cabinet when directed to disconnect power during servicing.

•  Connect all devices installed in a rack cabinet to power devices installed in the same rack 

cabinet. Do not plug a power cord from a device installed in one rack cabinet into a power device 
installed in a different rack cabinet.

•  An electrical outlet that is not correctly wired could place hazardous voltage on the metal parts of 

the system or the devices that attach to the system. It is the responsibility of the customer to 
ensure that the outlet is correctly wired and grounded to prevent an electrical shock.

(R001 part 1 of 2)

CAUTION: 

•  Do not install a unit in a rack where the internal rack ambient temperatures will exceed the 

manufacturer’s recommended ambient temperature for all your rack-mounted devices.

•  Do not install a unit in a rack where the air flow is compromised. Ensure that air flow is not blocked 

or reduced on any side, front, or back of a unit used for air flow through the unit.

•  Consideration should be given to the connection of the equipment to the supply circuit so that 

overloading of the circuits does not compromise the supply wiring or overcurrent protection. To 
provide the correct power connection to a rack, refer to the rating labels located on the equipment 
in the rack to determine the total power requirement of the supply circuit.

•  (For sliding drawers): Do not pull out or install any drawer or feature if the rack stabilizer brackets 

are not attached to the rack. Do not pull out more than one drawer at a time. The rack might 
become unstable if you pull out more than one drawer at a time.

•  (For fixed drawers): This drawer is a fixed drawer and must not be moved for servicing unless 

specified by the manufacturer. Attempting to move the drawer partially or completely out of the 
rack might cause the rack to become unstable or cause the drawer to fall out of the rack.

(R001 part 2 of 2)

6

1U 18.5-inch Standard Console Installation and Maintenance Guide

Summary of Contents for 1723-8BX

















































































Reviews: