Lenovo 10SJ0027IX User Manual And Hardware Maintenance Manual Download Page 64 | Manualshive

Page: 64 / 74

background image

Although there are no moving parts in your computer after the power cord has been disconnected, the
following warnings are required for your safety and proper Underwriters Laboratories (UL) certification.

CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.

Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with one
of these parts, contact a service technician.

1. Remove the computer cover. See “Removing the computer cover” on page 19.

2. Remove the front bezel. See “Replacing the front bezel” on page 20.

3. Remove the optical drive. See “Replacing the optical drive” on page 21.

4. Remove the storage drive bracket. See “Replacing the storage drive” on page 34.

5. Disconnect the power supply assembly cable from the system board.

6. Replace the power supply assembly.

Figure 108. Removing the power supply assembly

60

M920s User Guide and Hardware Maintenance Manual

«
...
62
63
64
65
66
...
»

Summary of Contents for 10SJ0027IX











































































Reviews:

No comments

Related manuals for 10SJ0027IX

Brand: Acer Pages: 106

Brand: Acer Pages: 83

Brand: Acer Pages: 81

Brand: Acer Pages: 89

T230H - Bmidh Wide Touch Screen Display

Brand: Acer Pages: 12

Brand: Acer Pages: 100

Brand: IBM Pages: 2

Brand: IBM Pages: 121

IntelliStation E Pro 6836

Brand: IBM Pages: 156

Brand: Markant Pages: 11

Brand: DAWAR Pages: 10

eBOX560-500-FL Series

Brand: AXIOMTEK Pages: 62

Brand: Atari Pages: 16

iDEQ-T1 IN294KT1

Brand: Biostar Pages: 53

OptiPlex 7440 All-In-One W11C

Brand: Dell Pages: 80

Brand: Dell Pages: 41

Mephisto Polgar

Brand: Hegener+Glaser Pages: 19

VAIO PCV-RX470DS

Brand: Sony Pages: 101

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands