Chapter 3.
3-9
Installing the monitor driver in Windows 10
To use the Plug and Play feature in Microsoft Windows 10, do the following:
Note:
You must download files from the Lenovo Monitor CD to use the Plug and Play feature
in Windows 10.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to boot into
Windows 10 operating system.
4. On the
Desktop
, move mouse to low-right corner of screen, choose
Setting
, double click
Control Panel
, then double click the icon of
Hardware and Sound
, and then clicking
Display
.
5. Click the
Change the display settings
tab.
6. Click the
Advanced Settings
icon.
7. lick the
Monitor
tab.
8. Click the
Properties
button.
9. Click the
Driver
tab.
10. Click
Update Driver
, then click
Browse the computer
to find the driver program.
11. Select
Pick from the list of device driver program
on the computer.
12. Click the
Have Disk
button. Click the
Browse
button and navigate to the following
directory:
X:\Monitor Drivers (where X is the drive letter designator for the CD-ROM drive).
13. Select the "
tio24gen3t.inf
"file and click the
Open
button. Click the
OK
button.
14. Select
TIO24Gen3T
and click
Next
. The files will be copied from the CD to your hard
disk drive.
15. Close all open windows and remove the CD.
16. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Note:
On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x
1080
at a refresh rate of 60 Hz, or 640 x 480 at a
refresh rate of 60 Hz.
Getting further help
If you still can’t solve your problem, please contact the Lenovo Support Center. For more
information on contacting the Support Center, please see
