Lenovo 100e Windows 2nd Gen, User Manual

Page: 37 / 74

2. In the Reset this PC section, click Get started .
3. Follow the on-screen instructions to reset your computer.
Use advanced options
Note: The items in the graphical user interface (GUI) might change without notice.
1. Open the Start menu, and then click Settings
➙
Update & security
➙
Recovery .
2. In the Advanced startup section, click Restart now ➙ Troubleshoot ➙ Advanced options .
3. Select a preferred option from the following list, and then follow the on-screen instructions.
• System Restore : Use a restore point recorded on your PC to restore Windows
• Startup Repair : Fix problems that keep Windows from loading
• Go back to the previous version
• Command Prompt : Use the Command Prompt for advanced troubleshooting
• System Image Recovery : Recover Windows using a specific system image file
• UEFI Firmware Settings : Change settings in your PC's UEFI firmware
• Startup Settings : Change Windows startup behavior
Windows automatic recovery
Note: Ensure that your computer is connected to ac power during the recovery process.
The Windows recovery environment on your computer operates independently from the Windows 10
operating system. It enables you to recover or repair the operating system even if the Windows 10 operating
system fails to start.
After two consecutive failed boot attempts, the Windows recovery environment starts automatically. Then
you can choose repair and recovery options by following the on-screen instructions.
Create and use a recovery USB device
It is recommended that you create a recovery USB drive as early as possible as a backup for the Windows
recovery programs. With the recovery USB drive, you can troubleshoot and fix the problems even if the
preinstalled Windows recovery programs are damaged. If you did not create a recovery USB drive as a
precautionary measure, you can contact Lenovo Customer Support Center and purchase one from Lenovo.
For a list of the Lenovo Support phone numbers for your country or region, go to:
https://pcsupport.lenovo.com/supportphonelist
Create a recovery USB drive
Attention: The creation process deletes anything stored on the USB drive. To avoid data loss, make a
backup copy of all the data that you want to keep.
1. Ensure that your computer is connected to ac power.
2. Prepare a USB drive with at least 16 GB of storage capacity. The actual USB capacity required depends
on the size of the recovery image.
3. Connect the prepared USB drive to the computer.
4. Type
recovery
in the search box. Then click Create a recovery drive .
5. Click Yes in the User Account Control window to allow the Recovery Media Creator program to start.
6. In the Recovery Drive window, follow the on-screen instructions to create a recovery USB drive.
Chapter 5
.
Configure advanced settings
31