2. Select
Security
➙
Set User Password
and press Enter.
3. Enter a password string that contains only letters and numbers. Then, press Enter.
Note:
The user password must be different from the administrator password.
4. Enter the password again and press Enter.
5. Select
Exit
➙
Exit Saving Changes
.
Enable power-on password
If the administrator password has been set, you can enable power-on password to enforce greater security.
1. Start the UEFI/BIOS setup utility.
2. Select
Security
➙
Power on Password
and press Enter.
Note:
The administrator password must be set in advance.
3. Change the setting to
Enabled
.
4. Select
Exit
➙
Exit Saving Changes
.
If power-on password is enabled, a prompt appears on the screen every time you turn on the computer. You
must enter the administrator or user password to start the computer.
Set hard disk password
You can set a hard disk password in the setup utility to prevent unauthorized access to your data.
Attention:
Be extremely careful when setting a hard disk password. If you forget the hard disk password, a
Lenovo authorized service personnel cannot reset your password or recover data from the hard disk. You
must take your computer to a Lenovo authorized service personnel or a marketing representative to have the
hard disk drive replaced. Proof of purchase is required and a fee will be charged for parts and service.
1. Start the UEFI/BIOS setup utility.
Note:
If you start the setup utility using the user password, you cannot set hard disk password.
2. Select
Security
➙
Set Hard Disk Password
and press Enter.
3. Follow on-screen instructions to set both the master and the user passwords.
Note:
The master and user hard disk passwords must be set at the same time.
4. Select
Exit
➙
Exit Saving Changes
.
If the hard disk password is set, you must provide the correct password to start the operating system.
Change or remove hard disk password
1. Start the UEFI/BIOS setup utility.
2. Select
Security
.
3. Change or remove the hard disk password.
• To change or remove master hard disk password, select
Change Master Password
and press Enter.
Note:
If you remove the master hard disk password, the user hard disk password will also be
removed.
• To change user hard disk password, select
Change User Password
and press Enter.
Secure your computer and information
27
Summary of Contents for 100e Windows 2nd Gen
