6
Power Source:
1.
Make sure the power cord is the correct type that is required in your area.
2.
This monitor has a universal power supply that allows operation in
100/120V ac or 220/240V ac voltage (No user adjustment is required)
3.
Connect the power cord into your monitor’s power input socket, and then
plug the other end into a 3-pin ac power outlet. The power cord can be
connected to either a wall power outlet or the power outlet socket on your
computer, depending on the type of power cord supplied with your
monitor.
Power cord:
For safe operation, use the power cord supplied with the unit.
Video cable
Connecting the video cable:
The monitor comes with a built-in video cable.
Plug the signal cable's 15-pin connector into the computer's video port and
tighten the two screws on the cable connector. (see figure 2)
Connecting the power cord:
Plug the power cord into the monitor's ac
power socket. Then plug the power cord into a grounded ac outlet or UL-
approved power strip or the power output socket on your computer.
Caution: If the AC outlet is not grounded(only two holes), install the proper
grounding adapter (not supplied).
Diskette:
The Installation Diskette included with your monitor contains
information that you might need for its use. Refer to the readme file on this
diskette.
1
2
Figure 2 Connecting cables
1.
Power Cord
2.
Signal Cable
