78
Installation and Maintenance
Service Manual
4.Remove electric box cover 2
5.Remove front case sub-assy
6.Remove vertical louver
Remove the screws on the electric box cover
2 and detecting plate(WIFI), then remove
the electric box cover 2 and detecting
plate(WIFI).
Note:
The position of detection board(WIFI) may
be different for different models.
Note:
ķ
Open the screw caps before removing the
screws arround the air outlet.
ĸ
case sub-assy is different for different
models.
Loosenn the connection clasps between
vertical louver and bottom case to remove
vertical louver.
Screw off the screws that are locking the
swing motor and take the motor off.
Loosen the connection clasps between front
case sub-assy and bottom case. Lift up the
front case sub-assy and take it out.
a
a
b
b
Procedure
Step
Swing moto
Electric box cover
Detecting plate(WIFI)
Screw
Electric box cover2
