background image

21

Selection of installation location

Basic requirement

Outdoor unit

Installing the unit in the following pla-

ces maycause malfunction. If it is un-

avoidable, please consult the local

dealer:

   

1. There should be no obstruction near air

    inlet and air outlet.

2. Select a location where the condensat-

    ion water can be dispersed easily and

    won't affect other people.

3. Select a location which is convenient to

    connect the outdoor unit and near the

    power socket.

4. Select a location which is out of reach 

    for children.

5. The location should be able to withstand

    the weight of indoor unit and won't incr-

    ease noise and vibration.

6. The appliance must be installed 2.5m 

7. Don't install the indoor unit right above 

    the electric appliance.

Indoor unit

1.The place with strong heat sources, 

   ,

8. Please try your best to keep way from 

fluorescent lamp.

   or volatile objects spread in the air.

2.The place with high-frequency 

   devices (such as welding machine,

   medical equipment).

3.The place near coast area.

4.The place with oil or fumes in the air.

5.The place with sulfureted gas.

6.Other places with special circums-

   tances.

    will not affect neighborhood.

2. The location should be well ventilated and dry, in which the outdoor unit 

Tools for installation

1 Level meter

2 Screw driver

3 Impact drill

4 Drill head

5 Pipe expander

6 Torque wrench

7 Open-end wrench

8 Pipe cutter

9 Leakage detector

10 Vacuum pump

11 Pressure meter

12 Universal meter

13 Inner hexagon spanner

14 Measuring tape

Note:

● Please contact the local agent for installation.

● Don't use unqualified power cord.

    won't be exposed directly to sunlight or strong wind.

3. The location should be able to withstand the weight of outdoor unit.

4. Make sure that the installation follows the requirement of installation 

    dimension diagram.

5. Select a location which is out of reach for children and far away from animals 

    or plants.If it is unavoidable, please add the fence for safety purpose.

Do not use the unit in the immediate 

  surroundings of a laundry a bath a   

  shower or a swimming pool.

7.

Summary of Contents for LMO12CI-100V232-X









































Reviews: