background image

22

Printed in U.S.A. © 2008 Lennox Hearth Products

P/N  850056M  Rev. C  04/2012

Lennox Hearth Products reserves the right to make changes at any time, without notice, in 

design, materials, specifications, prices and also to discontinue colors, styles and products . 

Consult your local distributor for fireplace code information .

We  recommend  that  you  record  the  following  important  information 

about your appliance .  Please contact your Lennox Hearth Products dealer 

for any questions or concerns .  For the number of your nearest Lennox 

Hearth Products dealer, please call 1-800-9-LENNOX .

REPLACEMENT PARTS

See Page 18  for a complete replacement parts list .  Use only parts sup-

plied from the manufacturer .

Normally, all parts should be ordered through your Lennox distributor or 

dealer . Parts will be shipped at prevailing prices at time of order .

When ordering repair parts, always give the following information:

1.

 The model number of the appliance .

2.

 The serial number of the appliance .

3.

 The part number .

4.

 The description of the part .

5.

 The quantity required .

6.

 The installation date of the appliance .

If you encounter any problems or have any questions concerning the 

installation or application of this system, please contact your dealer .

LENNOX HEARTH PRODUCTS

1508 Elm Hill Pike, Suite 108

Nashville, TN 37210

Visit us at www.Lennox.com

 

PRODUCT REFERENCE INFORMATION

1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210

Your Fireplace's Model Number ________________________________________

Your Fireplace’s Serial Number  ________________________________________

The Date On Which Your Fireplace Was Installed ___________________________

Your Dealer's Name _________________________________________________

Fuel Type    

 c  

Natural Gas   

c  

Propane Gas

Summary of Contents for Elite CVF - LP























Reviews: