Lennox CWC 020 2P, Application Manual, Page: 14 / 24

13
Cassette
unit
Diffuser panel
308
MODEL 600x600
Cassette
unit
Diffuser panel
308
MODEL 600x1200
Min. 500
(**)
Min. 500
(**)
298
720
720
Min.500
(**)
Min.500
(**)
MODEL
600x600
MODEL
600x1200
489.74
489.74
54.66
30.6
575
30.6
54.66
540
17.5
17.5
575
Fixing
points
Suspension rods M-8
1
2
1
1
2
1
2
Nut
Washers
1140
1225
42.5 42.5
600
493.6
55.2
51.2
Fixing points
(**)
INSTALLATION CLEARANCES
SETTING UP TEMPLATE MODEL 600x1200 SETTING UP TEMPLATE MODEL 600x600
UNIT INSTALLATION
3. Models 600x600 : cut the false ceiling to a maximum dimension of 625x625mm. For a panelled ceiling remove
one panel of 600x600mm.
Models 600x1200 : cut the false ceiling to a maximum dimension of 625x1225mm. For a panelled ceiling remove
two panels of 600x600 or one of 600x1200mm.
2. Ensure there is sufficient space around the unit to service it. Where there is a false ceiling, ensure that there is
enough space to provide access. Where there is a false panelled ceiling ensure that there is sufficient adjacent
space to remove the panels.
1. The unit should be positioned centrally within the room. The ceiling must be horizontal to ensure that the unit
is on level and that condensate water can drain away thoroughly. The unit must be installed in a position where
there is sufficient strength in the structure to support the weight of the unit. The false ceiling must have at less a
height of 308 mm.
4. Install the suspension rods to the ceiling, the rods should
have three nuts and two washers, as in next figure. The
setting up template can be used to indicate the position for
the suspension rods.
5. The water connections should be positioned before unit is installed.
NOTE: Before marking the fixing points to the ceiling,
ensure that the unit is positioned in the correct orientation
taking into account of where the electrical cabinet is required.
Ensure that water pipes can be run easily. When the unit
is fixed it is not easy to change position.