Lennox Compact Pro, Installation Operating & Maintenance Manual

Page: 7 / 41

CHAP 1.4 LIST OF ACCESSORIES
SUPPLIED
The unit and all necessary ancillary items
that make up the air conditioner are all
packed in the one carton.
Packaging may be transported per single
units, by hand by two authorized persons, or
loaded on a trolley, even stacking up to a
maximum of three packs.
The supply includes the parts listed in the
table below. Before beginning to assemble
the unit, make sure all the parts are within
easy reach.
A - Wall fastening bracket x 1
B - External air intake/outlet grids
(x 2) complete with chains
C - 2 tubes to insert into holes in the
wall, 50 cm long
D - Pipe fastening inner flange x 2
E - Kit of screws and anchor bolts
F - Manual of instructions for use,
maintenance, and warranty.
G - Paper template to make holes
1.4.1 Store the cartons in a closed environment protected against atmospheric agents and raised off the floor by planks or a pallet.
Storage
DO NOT TURN THE CARTON UPSIDE DOWN
1.4.2 The packing is made of suitable material and is done by expert personnel.
Receipt and The units are delivered complete and in perfect condition, however we suggest that you perform the following controls of
unpacking the quality of the shipping service:
- on receipt of the cartons check them for any damage and, if any is found, accept the goods with reservation, and keep
photographic evidence of any damage found.
- unpack and check the contents against the packing list.
- make sure none of the parts have been damaged during shipment; in case of damage you must report it to the shipping
company within 3 days of receipt, by registered letter with return receipt, presenting photographic documentation.
Copy of any correspondence should also be sent by fax to Compact Solutions (08452 262730).
No notice of damage will be accepted after 3 days from delivery.
Important note:
Keep the packing at least through the warranty period, in case you need to ship the air-conditioner to the service centre for repair.
Dispose of the packing materials in compliance with the rules in effect for waste disposal.