Lennox Comfair HD, Installation Operating & Maintenance Manual

Page: 13 / 18

2
ADJUSTING THE AIRFLOW DIRECTION
ADJUSTING THE DEGREE OF FLAP SWING
1 When the appliance is switched on or off, the flaps should swing fully upwards and then return to cover the entire
air outlet.
2 When the "Auto" button is pressed:
a. The flaps swing downwards and then open fully. This action restores the set angle of opening.
b. The flaps swing 35° upwards in the cooling mode and 10° in the heating mode.
c. The flaps swing 45° downwards in the cooling mode. In the heating mode the flaps go back 10° in relation to the
angle initially established after the first 5 swings.
3 When the DIREC button is pressed, the flaps swing by 10°.
a. The flaps swing downwards and then open fully. This action restores the set angle.
b. The flaps swing 35° upwards in the cooling mode and 10° in the heating mode.
c. The flaps swing 10° each time the DIREC button is pressed (from 35° until 75° when in the cooling mode, from
10° until 50° in the heating mode).
d. If this button is kept pressed, the flaps move continuously; the direction of airflow may be set by releasing the button
when the flap is in the desired position.
ADJUSTING THE RIGHT-LEFT DIRECTION
Adjust the direction of the right-left flaps by hand as required.
right-left flaps
Direct the front edge of the
flaps gently to the right or
to the left.
TIMER (CLOCK) FUNCTIONS
Before using the timer function, ensure that the remote control has been set to the current time.
1 PRESS THE ON BUTTON
The message ON TIMER flashes on display and the
start-up time below.
2 SET THE START-UP TIME AS REQUIRED
3 PRESS ENT TO CONFIRM
Once the start-up time is set, press ENT to confirm the
setting. The message ON TIMER stops flashing.
The fancoil will now start-up automatically at the set
time.
4 PRESS DEL TO CANCEL
Press the DEL button to delete the selection..
Notes: to verify whether the timer is on that yellow lamp
is lit.
1
2
3
4
ON TIMER
INSTALLATION
- OPERATING &
MAINTENANCE
MANU A L
Page 11