Page 5
Outdoor Air Hood
Align dimples to position hood parts and secure in place
with #10 self-drilling screws.
1- Use the locating dimples to install the right hood side
onto the unit. Install the left side in the same manner.
See figure 10.
Note - Incorrectly positioning the hood sides can result in
leaks or a hood that will not assemble properly.
2- Install the bottom filter bracket between the left and
right hood sides. Secure in place with #10 screws.
See figure 10 and 11.
3- Attach hood top onto the left and right hood sides.
Secure with #10 screws.
IMPORTANT - Do not tighten screws completely.
4- Align holes in the top flange of the hood top with the
locating dimples provided on the unit. Secure with
#10 self-drilling screws. See figure 10.
5- Secure the hood top to the left and right hood sides.
Tighten the previously-installed screws.
FIGURE 11
HOOD SIDE VIEW
ALIGN VERTICAL
HOLES ON BRACKET
WITH VERTICAL HOLES
ON SIDE OF HOOD
BOTTOM FILTER
BRACKET
HOOD TOP
FILTER
UNIT
FILTER
FILTER
HOOD
TOP
FRONT FILTER
BRACKET
3
CAULK HOOD TOP
TO UNIT TO SEAL
WATERTIGHT
8
7- Install front filter bracket on the left side of the hood.
Secure with three screws. See figure 11 and 12.
8- Insert filter into the bottom filter bracket. Slide filter to the
left into the shorter front filter bracket. See figure 12.
9- Insert the second filter into the bottom filter bracket.
Install the longer front filter bracket to support the
front of filter. Secure using three screws. See figure
9 and 13.
BOTTOM FILTER
BRACKET
FRONT FILTER
BRACKET
(SHORT)
FIGURE 12
INSTALL FIRST FILTER
FILTER
BOTTOM
FILTER
BRACKET
FRONT FILTER
BRACKET (LONG)
FIGURE 13
INSTALL SECOND FILTER
FILTER
