• 5 •
Application Guide • AIRCOOLAIR-AGU-1603-E
GENERAL DESCRIPTION
The new generation of microprocessor based control, CLIMATIC
60 equip the AIRCOOLAIR range.
It inherits more than 20 years of technology and fi eld operating
experience from its predecessors Climatic control platforms.
CLIMATIC 60 controller intelligently improves effi ciency and
helps set up and service operations to guarantee long lasting
performance.
CLIMATIC 60 is designed to provide the best energy effi ciency
throughout unit’s life cycle while ensuring reliable and consistent
operation with user friendly interfaces.
This new controller constantly monitors more machine parameters
than ever to improve unit operation and maximize effi ciency
and reliability
The PI algorithm of the CLIMATIC 60 controls the supply air
temperature and a temperature difference between supply and
return. It is able to optimize the refrigeration circuit operation to
match perfectly the required cooling or heating load maximizing
effi ciency and comfort.
It will also improve reliability with features such as compressor
operating limits monitoring, (High and Low refrigerant pressure
and temperature now measured and displayed on DS60 and
Bus) refrigerant leak detection or compressor operating time
equalization and protection against excessive short cycling.
Faults and alarms
CLIMATIC 60 manages more than 90 different faults and alarms
codes and can store the last 32 with time and date. The stored
faults and alarms can then be displayed on the DS60 and on
the communication bus with the full text detail.
Intelligent air quality management
With accurate percentage of fresh air the dampers are regularly
calibrated to introduce just the required amount of fresh air in the
building to reduce annual energy consumption. The fresh air ratio
can also be controlled using the indoor CO2 level as an input.
Intelligent heating priority optimization
This feature allows the user to program the priority between the
different heating elements (thermodynamic, electric heaters or
auxiliary heating). This is particularly interesting on units with
electrical pre-heaters. This feature maximizes energy effi ciency
by optimizing heat pump operation depending on the outdoor
temperature.
Filtration
Two fi ltration levels are available. The standard equipment is G4
washable and refi llable fi lters with metallic frame. This type of
confi guration allows to extend the lifecycle of fi lters and reduce
the cost of replacement, changing only the media. G4 pre-fi lter/
F7 fi lter is optional.
Fire Insulation
Air treatment sections are insulated with M1 material: this insures
that the insulation doesn’t burn and doesn’t create toxic smoke.
M0 insulation is in option mechanically fi tted.
CONTROL
COMFORT AND AIR QUALITY OF SPLIT UNIT
Summary of Contents for AIRCOOLAIR ASC 020S
Page 2: ......
