5
Humidifier
The installation of the humidifier requires the connection to the water supply and drain hoses.
Figure 6
Humidifier.
To simplify installation, it is recommended to use hose with an inside diameter of 6 mm and an
outside diameter of 8 mm and the revolving 3/4” G connection, either straight or 90°.
A shut-off tap and a mechanical filter should be installed to trap any solid impurities.
The drain water is connected using a section of rubber or plastic hose resistant to 100°C, with a
recommended inside diameter of 32 mm.
The drain connector is suitable for heat sealing with polypropylene drainpipes.
WARNING
The drain hose must be free, without backpressure and with a drain trap
immediately downstream of the connection to the humidifier.
The following conditions represent correct water connection:
•
Installation of a shut-off tap in the supply water line;
INNOV@-DHF-IOM-0922-EN
• 18•
