Edition 2015-03-31
10
Iron Horse (FIG. 2)
The Iron Horse consists of the following parts:
Note! Some parts are optional and are not
included as standard.
•
Chassis with mounts for the drive unit, log bunk,
bogie and caterpillar track.
• Load anti
-slip guard.
• Load
anti-slip guard with integrated power winch.
• Manual winch.
The drive unit consists of the following parts:
• Engine with muffler and fuel tank
• Variator.
• Gearbox with mounts for the steering arm and
drive axles.
• Dog clutch
• Steering brake.
The steering arm consists of the following parts:
• Handlebars with controls
• Adjustable spring for weight balance
• Steering yoke
Chassis (FIG. 3) and (FIG. 4)
The chassis is made up of welded square tube
with mounts for the gearbox, load anti-slip guard,
drive axles and bogies. The chassis is also fitted
with perforated sheet metal plates that protect the
tracks. The plates can also serve as a basic
platform to transport loads. The chassis is
equipped with a swing plate to attach the log bunk
and other accessories. The chassis also houses
strong mounts for the machine's bogie and bogie
wheels. The Flex model also has an accessory
mount that is adjustable lengthwise for increased
application possibilities.
Wheel bogie and caterpillar track
(FIG. 3) and (FIG. 4)
The wheel bogie consists of the bogie cradles,
which is supported by bearings on the chassis.
The bogie is available with two types of wheels.
1.
Nylon wheels with double wheels on all
axles.
2.
Nylon wheels with double wheels on all
axles, supported on bearings and sealed.
The caterpillar track is manufactured of natural
rubber, which is extremely hardwearing and
reinforced with Kevlar and nylon cord. The tracks
are available in two versions.
1.
With tooth gaps, which are reinforced by
metal clips and cast epoxy rods.
2.
For particularly demanding conditions,
there is a version with internal drive with
interior rubber heels.
FIG 3
FIG 4
FIG 2
