Lenel OnGuard 2013, Installation Manual

Page: 32 / 51

Programming the System
32 —
revision 1.007
Another screen that will appear will be the non-current date and time which can be reset to be current later.
The bottom LCD line will request that a 3-digit ID be entered. Enter the default ID for a service technician:
000 .
Service, Enter PIN:
will appear. Enter the default service user's pin: 2482
The next screen will say:
Configure?
and give a selection for the mode in which you want to configure
the system. The first selection is
Locally
meaning the system can be configured using the keypad only.
Use the left-right arrow keys to toggle between
Remote
for configuring the system with a connection to the
configuration software.
6.1.1 Configure Locally
If the configure locally selection is made, the next screen will ask to
Select region
for the style of
system configurations that are required for different places in the world. Use the left-right arrow keys to
toggle through them. The selections are:
• N (North) America,
• European,
• United Kingdom,
• Aus/NZ (Australia, New Zealand), and
• China/H.K (Hong Kong).
6.1.2 Selecting North America
If North America is selected, the screen will ask the number of users that will be operating the system.
Use the left and right arrow keys to toggle through the selections of
20 Users
,
100 Users
or
300 Users
for the closest number of users in the system and press Ok .
Example: 20 Users
The next screen asks
Save Settings?
. Select Yes with the arrow keys and press Ok .
After a few moments, the screen will go momentarily blank. It will then display
ComsLost
again. Enter the
code 24822 again.
Push for Menus
will appear with the option to set the system to
Stay
or
On
by pressing the keypad
button below them. Press the right arrow key to browse through the Menu Options. The selections are:
•
Status
(condition of system),
•
Bypass
(disable a protection point),
•
History
(alarm etc. history),
•
My PIN
(change your PIN number),
•
Users
(edit system users),
•
Test
(test the system),
•
Config
(edit the system's program),
•
Time
(adjust the LCD keypad's Time and Date),
•
Verify
(transmit an Okay signal if a false alarm occurred),
•
Arm/Disarm
(set protection ON or OFF).
Select Config and press Ok .
Press the keypad button below Ok when the selection has been made.
Configure?

Locally


Ok