6. Protocessor
Connect an Ethernet cable to access the
Protocessor.
(not supervised)
7. Aux Relays
The relays are general purpose relays.
(supervised
by FACP
)
8. RS232
For future use.
9.
Inputs 1-4
Inputs 1-4 are general purpose inputs.
(supervised)
10.
Inputs 5-8
Inputs 5-8 are general purpose inputs.
(supervised)
11.
Inputs 9-12
Input 11: UPS AC Fault.
Input 12: UPS Battery Fault.
Inputs 9
&
1
0
are general purpose inputs.
(supervised)
12. Data In/Out
Connect an OP Data Out to the I/O
expander Data In. Connect the I/O
expander Data Out to the next OP Data
In.
(supervised)
13. GND
Connect a common audio ground wire
from the GND connector to the first OP.
14. UPS Power In
Connect UPS power here or jumpers if a
UPS is not used.
(
not
supervised)
15. Power Input
Power cord connector (IEC 60320).
110-208 VAC.
(
not
supervised)
3