LENCO TFT-711 - User Manual Download

Page: 46 / 52

Page 43 of 48 pages

LENCO

TFT-711

ENGLISH

Key in the original (currently existing) PIN number. Mostly this PIN number is

1234

. It is

advisable to change this standard provided PIN number. After the PIN is keyed in, key in the
NEW PIN as in below menu:

After the NEW PIN is keyed in, a confirmation of the NEW PIN is needed. Key in the NEW
PIN again as in below menu:

The new PIN has been updated successfully if the new PIN has been confirmed correctly
and the following image is shown:

Press the

YELLOW

EXIT

key to return one level in the sub-menu or press the

BLUE

key

to save the selection.

Note:

Write your newly entered PIN code down and store it safely. If the new PIN code is not

remembered, then the Smartcard can only be unlocked and provided from a standard PIN
code by your subscription provider.

Activate or deactivate the PIN code of the Smartcard

If  a  special  channel  subscription  is  ordered,  like  an  Erotic  channel,  then  this  channel  is
standard  secured  with  the  PIN  code  of  the  Smartcard.  The  security  can  be  removed  by
changing the  Maturity rating.

Press

MENU

on the remote and enter

Settings

→

Pay TV Settings

menu, select

Maturity

Rating

Summary of Contents for TFT-711 -





















































Search results

Summary of Contents for TFT-711 -

Reviews:

Related manuals for TFT-711 -

Brands by name

Popular brands

LENCO TFT-711 -, User Manual

Search results

Summary of Contents for TFT-711 -

Reviews:

Related manuals for TFT-711 -

Brands by name

Popular brands