35
(All described scart cables and antenna cables are not supplied)
DEC
VCR
TV
to AV1
Playback
(All described scart cables are not supplied)
TV (Back view)
to AV2
Recording
Connection to other equipment
1. Connect with various unit
2. Two video recorder connection (e.g. to duplicate a video tape)
DVD player:
For best picture quality, select RGB-PLAYBACK on the DVD player (see Owner’s manual of the DVD
player). Always connect the DVD player to AV1 or AV3. AV1 and AV3-Scart socket can perform RGB-
playback. Press
0/AV
on the TV-remote control repeatedly until AV1 appears.
Notes:
• S-Video can be playback with the Scart socket AV2 or side AV input AV4 (see page 36). If you wish to
utilize S-Video at Scart socket AV2, use an optional S-Video-to-SCART-Adaptor. (not supplied)
• RGB provide best-possible picture quality. Therefore in case of RGB-signal’s playback, color- and also
sharpness-adjustment can not be available.
Example:
You will perform the color-adjustment as explained on P.23. During you adjust color with
remote control, the color level indicated on menu actually changes, however the displayed true color-
strength constantly remains with no-change.
• The DVD player always must be connected to TV-unit directly. It must not be connected to a video
recorder. Many DVDs are equipped with a copy-guard. These copy-guard causes reception disturbance
if the DVD player had been connected to a video recorder.
Select the “MONITOR” position in menu.
(see P.36 paragraph 5-2)
Select AV1-INPUT (see P.11).
You can see playback-picture of
videorecorder 1.
This signal does output via AV-2 and can
be recorded by videorecorder 2.
Videorecorder 2 does precisely record,
what you see on the screen.
3U84011A [E] P35-BACK
20/12/05, 15:22
35
