5
Improve FM & DAB+ Reception
The number and quality of broadcast stations depends on the reception
conditions at the location of the device as well as the radio antenna.
Optimum reception can be achieved with the telescopic antenna when it
fixed and placed at the right position.
►
To improve the DAB/FM reception, extend the telescopic antenna to the
full length and alter the position. (Figure 1)
►
When the reception is still not better after extending the antenna, move
the radio to another position/room
Troubleshooting
Fault
Possible cause/action
No function
-
If the device has been disrupted by a
thunderstorm, a static charge or another
external factor, follow this procedure to resolve
the problem: Power off this device and power on
it again 10 seconds later.
No sound
-
The volume may be set too low or in mute mode.
-
In Bluetooth / AUX in mode: Set the volume of
the external device to the maximum and then
control the volume by using “ (07)” or “
(08)” button.
No Bluetooth®
connection
-
Take care to ensure that all settings have been
made correctly on all devices. The Bluetooth®
function may be deactivated on the external
device. (re) activate it, if necessary.
-
Check whether the device to be connected is
switched on and is in search mode.
Device freezed
(no reaction on
buttons/screen)
-
Take use a small paperclip and insert it carefully
into the reset hole on the back until you feel a
click. This will do a soft reset. (all presets and
setting will remain).
Specification
Unit Dimension
180 (L) *55mm (W) *68mm (H)
Unit Weight
407g
Display
Type
TFT color Display
Size
2.4inch
Bluetooth
Specification
V5.0
Supported Profile
A2DP, AVRCP, HSP
Connection
Distance
10 meters (open
area)
Power
Class II
DAB
Tuning Range
Band III;
174.928MHz –
239.2MHz
Preset Memory
30 stations
FM
Tuning Range
87.5
-
108MHz
Stereo/Mono
Selectable
Preset Memory
30 stations
Antenna
telescopic type
Audio Output Power
Output Power
2 x 3 W RMS
Freq. Responses
80Hz to 16, 000Hz
Power Source Input
TYPE
-
C USB Port
PC’s USB port Power or DC 5V, 2A
Built
-
in
-
Battery
Lithium
-
ion 3.7V 2500mAh
Operating
Temperature
0
-
40°C
Guarantee
Lenco offers service and warranty in accordance to European law, which
means that in case of repairs (both during and after the warranty period) you
should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco
directly.
Important note: If this unit is opened or accessed by a non
-
official service
center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all
warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation. All items