LENCO LED-2250, Instruction Manual

Page: 16 / 29

You can select the input source menu by pressing the Source button on the remote control or
the INPUT button on the TV.
Auto installation setup
Source Menu
Power On / Off the TV
INPUT
SOURCE
ATV
DTV
HDMI
SCART
YPBPR
AV
VGA
13
1.Connect the AC/DC power adapter with the TV and the AC outlet.
2.Connect the analogue antenna cable or DVB-T
socket.
3.Switch on the TV by pressing the power button.
4.The “The First time installation”menu will appear on your screen.(Picture
below).
IMPORTANT NOTE:
So if only the analogue antenna cable is
connected you will get no
signal(below picture)because the default
mode is DTV and not ATV
(ATV=Analogue cable).you can switch to
ATV mode as follow:
1.Press “input” button
2.Select “ATV” source
5.Press “OK” button on the remote control to start the Tuning process.The
TV will automatically find all available ATV and/or DTV channels and
store them.
After the First Time Installation winzard is
complete the TV will enter the default source
DTV mode(DTV mode=DVB-T)