
6.
OK/ Directional buttons
-OK button
- Press to confirm or cancel.
-
Directional buttons
–roll the button up/ down/ left/ right to move
the cursor
7,8. Previous/Next pg button
– press to turn to the previous /next
page
9. Earphone jack
10. Mini USB jack
– for data transfer and emergency charging
11. SD card slot
– supports SD card
12. Built-in Speaker
Power On and Off the Reader
•
Press and hold the [Power] button for 3 seconds to turn on/off the
reader.
•
It may take a few moments for the reader to turn on and load the
content.
•
If the reader does not turn on, charging is required.
Charging the Reader
•
You need to charge the reader prior to using it for the first time or
when battery power is low.
•
Please turn the reader to standby mode to shorten the charging
process.
•
It will take about 6 hours to fully charge the reader in standby
mode (LCD screen turned off)
•
You can also charge the reader by connecting the USB cable to a
PC. Upon successful connection to PC, press the OK button to
select “
Power
”.
Charging through PC may not be able to fully
charge the reader due to the low output charging current from PC
USB port.
•
When a DC /USB power cable is connected to the reader for
charging, the reader will enter standby mode after remaining idle
for 60 seconds. Press the [Power] button to wake up the reader.
•
The battery status is displayed at the bottom left corner. The
remaining battery playback time is displayed right next to the
battery icon.
Getting Started
3