24
NOTE:
When no soundtrack languages are recorded, pressing this button will not work.
16.
Initial settings
Once the initial programming is entered it will be retained in the memory until changed, the player
can always be operated under the same conditions.
Common procedure for initial settings
Press D.SETUP on the remote control.
Use the navigation buttons to select your preferred item, and press OK, each screen for
setting the value is displayed. Then move the navigation buttons to set the item and press OK
to confirm the settings.
Press D.SETUP again to close the setup menu.
Use the LEFT or RIGHT navigation button to switch to another main setup item. Then press the RIGHT
or OK button to enter the submenu page; press the LEFT button to return to the previous menu page.
1.
GENERAL
1.1
TV DISPLAY -
For selecting the TV output
mode.
Options:
a)
Normal/PS: Pan & scan mode.
b)
Normal/LB: Letter box mode.
c)
Wide: 16:9 wide screen mode.
1.2
OSD LANG -
It is used to choose your
desired OSD language.
1.3
SCREEN SAVER -
If no operation is carried out for 5 minutes, the screen saver will be
displayed on the screen when the SCREEN SAVER is ON.
1.4
LAST MEMORY -
Enter another input source during DISC playback, and then back to DVD
input source again, this unit will resume playback from the point where the last playback
was stopped, if the LAST MEMORY is ON.
