LENCO DVD-51, User Manual

Page: 7 / 12

SETUP MENU SYSTEM DVD USER'S MANUAL
B) LANGUAGE SETUP
Highlight the OSD LANGUAGE, AUDIO
LANG, SUBTITLE LANG or MENU
LANG option, and press the Arrow
buttons to choose the language you
prefer. Press Enter to confirm, the
screen will display the language items:
English, Chinese, German, Spanish,
French ,Portuguese,etc .
LANGUAGE SETUP
connection to a Dolby Digital, DTS ,or
MPEG receiver or decoder.
SPDIF / PCM: Choose this setting if
your DVD player is connected to a2-
channel digital stereo amplifier; When
playing a disc recorded with Dolby
Digital and MPEG audio formats,
audio signals will be modulated into a
2-channel PCM signal, and it will be
output from the Coaxial Output jack or
Optical Output jack.
Battery Installation:
1. Push downward and outward the leaf spring to
remove the battery compartment cover.
2. Insert two size AAA batteries according to the
"+" and "-" markings.
Note:
A. Do NOT mix different types together, or old batteries with
new batteries.
B. while the remote controller will not be used for an
extended period of time, remove the batteries to prevent
possible corrosion.
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP ENGLISH
CHINESE
GERMAN
SPANISH
FRENCH
PORTUGUESE
d) VIDEO SETUP
BRIGHTNESS
Use the Up and Down arrow button to
move the scroll and adjust the
brightness,Contrast, Hue or Saturation.
VIDEO SETUP
C. To prevent corrosion resulting in damage, remove exhausted
batteries immediately. W here the remote exhausted batteries
immediately. W here the remote controller doesn't appear to
operate normally, replace both of the batteries.
D. Typical life for the batteries provided with this product is
about 6 months. The life expectance may vary according to
the use status.
Use of the remote controller
C) AUDIO SETUP
The audio setup options are
illustrated below:
AUDIO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
EXIT SETUP
12
10
8
6
Point the remote controller toward the remote
sensor on your DVD home theater center.Upon
receipt of the signal from the remote controller,
the equipment will operate accordingly.
The description in this manual is based on the
buttons on the equipment. You may use the
AUDIO OUT
EXIT SETUP
ANALOG
SPDIF/RAW
SPDIF/PCM
e) SPEAKER SETUP
The speaker setup options are
illustrated below:
DV D
counterparts on the remote controller to do the
same.
Note:
A. Do not place this equipment in a place exposed to direct sunlight
or strong light source like inverting fluorescent light, or else it
may interfere with correct operation of the remote controller.
B. when other similar remote controller is used in the same room,
Highlight the AUDIO OUT option, and
press the Arrow buttons to choose the
audio output mode you prefer. Press
Enter to confirm; There are 3optional
audio output modes: ANALOG, SPDIF/
RAW, and SPDIF/ PCM.
ANALOG: From the Coaxial Output
jack and the Optical Output jack, no
signal is output.
SPDIF/ RAW: Choose this setting if
your DVD player is connected to a
power amplifier with a coaxial cable or
an optical cable; When playing a disc
recorded with Dolby Digital, DTS and
MPEG audio formats, the
corresponding digital signals will be
output from the Coaxial Output jack or
Optical Output jack. This player's
digital output jacks are designed for a
DOWN MIX
Use the Up and Down arrow button to
move the scroll and adjust the
saturation.
LT / RT: Choose this setting, it will be
sound like in a movie theatre if the
original movie the disc was recorded
from was encoded in the Pro Logic
Dolby Digital format.
STEREO: Choose this setting, when
5.1-channel sound playing, two
channels of signals will be output
or when this product is used near other equipment using
infrared ray, interference with the operation of this
remote controller may occur.
C. do not place any object on the remote controller or else it may
cause unintentional depression of the buttons and waste the
batteries unnecessarily.
D. The front of the chassis should not be glazed with color glass,
or else it may cause interference with normal operation of
the remote controller.
E. Any barrier between the remote controller and remote sensor
will inactivate any operation of the remote controller.
F. The operating range between the remote controller and the
equipment shall be no more than 5 meters (16 feet). W hen
the operating range becomes shorter, replace the batteries
with new ones.
16 5