LENCO DVD-51, User Manual

Page: 5 / 12

SETUP MENU SYSTEM DVD USER'S MANUAL
2. Front and Rear panel illustration
FRONT PANEL
DYNAMIC RANGE: When "LINE OUT"
is selected, choose this setting to
adjust the line out ratio and get different
effect. If adjusting to FULL, the audio
1 2 3 4 5 6 7 8 9 10 11
signal peak value will be the minimum;
while adjusting to OFF, maximum.
NOTE:
This option will be validated when the
DOWNMIX OFF.
1. POWER(ON/OFF)
2. VFD
3. Disc tray
4. PLAY/PAUSE Button
5. STOP Button
6. Fast Backward 7. Fast Forward
8. EJECT button
9. Remote receiver
10. USB Jack
11. CF/SD/MMC/MS/
SMC card jack
REAR PANEL
1 2 3 4
DUAL MONO (LEFT + RIGHT)
Choose this option to setup the Land R
mono output mode; There are four modes
in this option: STEREO, MONO L, MONO
R, and MIX MONO; It is mainly used in
karaoke mode.
REFERENCE:
To protect your DVD player, the interval
between two consecutive Power button
5 6 7 8 9 10 11 12
operations must be above 30 seconds.
No using for a period of time, please pull
out the plug from the electronic outlet.
The player should be operated only on
condition that the type of power supply
corresponds to the marking label.
Otherwise, it doesn't work or even be
damaged.
The player may not be compatible with
some encrypted discs.
If the player stops playback by accident,
please power it on again.
1. 5.1 Channels Front(Left/Right) Audio out
2. 5.1 Channels Subwoofer Audio out
3. YPbPr Component Video out
4. Composite Video out
5. 5.1 Channels Surround(Left/Right)
Audio out
6. 5.1 Channels Center Audio out
7. Down Mix Left/Right Audio out
8. Coaxial output
9. S-Video output
10. Optical output
11. Scart output (Optional)
12. AC 110-240V 50/60Hz
18 3