LENCO DVD-305, Owner'S Manual

Page: 16 / 96

16
ADVANCED OPERATION
MEMORY CARD OPERATION
There is a memory card interface on the
front panel of the unit.
Using the SD/MMC/MS card:
1) When there is no disc in the disc slot
and no USB driver is connected, and
you insert memory card into the
memory card interface, the unit will
read the card automatically.
2) When there is a disc in the disc slot or
when a USB drive is connected, and
you insert a memory card, the unit will
play the disc or read the USB drive.
Press the (stop) or the (pause)
button to enter STOP or PAUSE mode,
then press the
GOTO button to enter
the reading card mode.
Note: When reading the memory card,
please don’t touch or take out the card.
If you followed the instruction above, and
the unit can’t read the card, please check
if the card is in good condition, or take
out the card then insert it into the card
interface once more.
USB PLAY OPERATION
On the front panel of the unit, there is an
USB interface. An USB driver can be
connected through this interface.
1) When there is no disc in the disc slot
and without inserting a memory card,
connect a USB driver to the USB
interface, the unit will read the files
stored in the USB device Automatically.
2) When there is a disc in the disc slot or
a memory card is inserted into the
memory card interface, connecting a
USB driver to the USB interface, the
unit will play the disc or read the card.
Press (stop) or (pause) button to
enter STOP or PAUSE mode, then press
GOTO button to read the USB device.
Note:
When reading the USB device, please
don’t touch or take out the card.
If you followed the instruction above, the
unit can’t read the card, please check if
the card is in good condition, or take out
the card then insert it into the card
interface once more.
• The main unit can only support the
standard USB-memory disc which is
approved by Microsoft.
• USB MP3 player is not a standard which
means different brands or different
models have their own standard. So
our product cannot support every MP3
player.
• When connecting an MP3 player and
there is a normal battery in the player
(non rechargeable battery), you should
remove the battery from the MP3 player
then connect it to the USB interface.
Otherwise, it may cause battery burst.
• When in USB play mode, be sure not
to remove the USB drive from the USB
interface.