~ 19 ~
Playing a Disc
1.Make sure the Player has the power from the AC adaptor.
2.Load a disc, following these steps:
Open the top cover.
Press the
OPEN
button to open the disc cover.
Place a disc into the tray with the label side facing up.
Close the disc cover.
3.Slide
POWER
to
ON
to turn on the power.
4.Repeatedly press
TV/DVD/USB
to select DVD mode.
Preparation for Playback
Play
Press (on the remote control) or (on the player) to start
play.
1.Press (on the remote or on the player) to temporarily stop
the playback, " " appears on the screen.
2.Press again to stop the playback.
Stop
When you press or
STOP
, the player remembers where you
stopped, and when you press
PLAY
later, it will play from where
you stopped it. However, during which, if the disc is removed,
the
STOP
( ) button is pressed again or the player is turned
off, the
RESUME
function will be lost.
Resume
You can skip chapters on DVD-Video, tracks on CDs, and
Video CDs.
1.To skip forward, press during play ,it skips to the next
chapter or track. Each press increases the numbers of skips.
2.To skip to previous chapter or track, press .
Skip
1.During playback, to fast forward, press and hold (on the
player) to increase the fast forward speed 2x, then repeatedly
press to increase to 4x, 8x, 16x, 32x.You can also simply
repeatedly press on the remote control to increase the
fast forward speed.
2.During playback, to fast reverse, press and hold (on the
player) to increase the fast reverse speed 2x ,then repeatedly
press to increase to 4x, 8x, 16x, 32x. You can also simply
repeatedly press on the remote control to increase the
fast reverse speed.
3.To resume normal playback, press .
Fast Forward and Reverse
Adjusting volume
Press
VOL+
or
VOL-
to change volume.
1.During playback, repeatedly press to play one frame at a
time.
2.To resume normal playback, press .
You can only perform step play in the forward direction.
Frame-by-Frame Playback
Summary of Contents for DVD-249
Page 2: ......
