LENCO 8711902066156, User Manual

Page: 19 / 103

- EN 19 -
Technical Specifications
Input AC 100-240V ~ 50/60Hz
Output power
Speaker Driver
Battery in remote control 2 x 10 W RMS
4Ω , 15W
CR2025 Li-Mn battery, 3.0V, 150mAh
DAB Frequency range 174.928 - 239.200 MHz
FM Frequency range 87.5 - 108 MHz
Bluetooth Frequency range:
Bluetooth Version:
EIRP/RF output power: 2402 - 2480MHz
V5.0
<3.56dBm
Power consumption Max 28W
Power consumption (standby) < 1W
Operating Temperature 0°C-35°C
Operating position Horizontal
Dim. unit 430 x 215 x 145mm
Weight 3.5KG
Remark
: The maximum connection distance is around 10 meters. Please place your Bluetooth device as close as
possible to this device to avoid connection getting disturbed.
WARNING! Risk of hearing impairment
•
Set a low volume on the playback device before connecting headphones.
•
Avoid excessive volume, particularly over extended periods or
frequent use. Excessive volume can result in permanent hearing
impairment.
About the disks
Handling
Do not touch the underside of disks.
Hold disks by the edges to avoid leaving fingerprints on the surface. Any
dust, fingerprints or scratches may cause a malfunction.
Never affix a label or sticky tape to the disk.
Storage
Put disks back in their case after use.
Never expose disks to direct sunlight or heat sources. Never leave disks inside a
car parked in full sunlight.
Cleaning
Use a clean, soft, lint-free cloth to clean the disk, working from the center
outwards in a straight line. Do not use solvents such as petrol, thinners,
commercially available cleaners or antistatic sprays for vinyl disks.