16
The pan must be inserted all
the way into the appliance to
activate the contact switch. Otherwise
the appliance will not heat up.
5. Insert the mains plug into an easily
accessible, earthed wall socket.
You will hear an audio signal and
the indicator light at the front will
light up.
The display briefly lights up com-
pletely then only the Start/Pause
button remains illuminated.
The appliance is on stand-by.
6. To activate the appliance, hold
down for approx. 3 seconds.
The appliance is set to 200 °C
and 15 minutes cooking time, as
a default. The minutes flash on
the display for a few seconds.
Then, the temperature and
cooking time are shown
alternately on the display.
You can set the temperature
from 80 °C to 200 °C (in incre-
ments of 5 °C) and the cooking time
from 0 to 60 minutes (in 1 minute
increments).
7. Set the temperature according to
the guidelines in the cooking table
by pressing or holding the and
buttons.
8. Set the cooking time according to
the guidelines in the cooking table
by pressing or holding the and
buttons.
If the appliance has not preheat-
ed, add 3 minutes to the cooking
time.
9. To start the cooking process, press
.
The “Heating up” and
“Fan on” icons appear on the
display.
The appliance is heating up.
As soon as the appliance has
reached the selected temperature,
the icon goes out.
The time display will now
always show the time remaining.
During the cooking process
M
Some food should be shaken once
halfway through cooking (see
table). To do this, simply take the
pan out of the appliance and toss
it a little, so that the food is moved
and rearranged.
M
If you wish to briefly interrupt the
cooking process, press .
flashes.
M
To continue the cooking process,
press again.
If no buttons are pressed for ap-
prox. 60 seconds, the appliance will
automatically switch to stand-by
and you may need to start the
cooking process again from the
beginning.
M
To stop the cooking process early,
hold down for approx. 3 seconds.
The appliance is now on stand-by.
Ending the cooking process
1. Once the time has elapsed, you
will hear 5 audio signals and
00
minutes and flash on the
display 5 times.
The appliance automatically
switches back onto stand-by. Only
the icon remains illuminated on
the display.