15
OpERATING INSTRUCTIONS
justment. The seat adjustment lever can be attached to either. Taller users may want to use the front
hole; shorter users may want to use the back hole.
handlebar Adjustment:
Adjusting the handlebar height
Handlebar height is a matter of preference. Start with the handle bars
1.
at the same height as the seat. Adjusting the handlebars higher will
give the rider a more upright position; lowering them will result in a
more prone position.
Raise or lower the handlebars by loosen the handlebar post adjustment
2.
and sliding the handlebar post up or down as desired. Tighten the ad-
justment handle to secure the handlebar post. Note the final position
mark on the handlebar post for future reference.
Adjusting the handlebar’s Forward/Aft position
Loosen the handlebar forward/aft adjustment lever and slide the handlebars either forward of
3.
backward as desired. The forward/aft position should be set to allow the rider to comfortably grasp
the handles with a slight bend at the elbow.
Tighten the adjustment lever clockwise to secure the handlebar assembly. (Remember to use the
4.
ratchet feature of the adjustment lever as necessary.) Note the final position mark for future refer-
ence.
Summary of Contents for RevMaster Sport
Page 1: ...OWNER S MANUAL...