Lemmer DC1600, Owner'S Manual, Page: 9 / 32

9
ZIP TIP & BIG BARREL INFORMATION
Pos. Order # Description
1) L043-001 Zip Tip housing (Lemmer)
L043-002 Zip Tip housing (Graco)
L043-003 Zip Tip housing (Binks)
2) L043-005 Zip Tip seal kit (includes gasket #3)
L043-006 Spring, 3/pkg (not shown separately)
3) L043-008 Nylon gasket
L043-009 Tube of 8x nylon gaskets
4) L043-*** Zip Tip - see chart
3
2
1
4
Pos. Order # Description
1) L038-001 BB Tip housing (Lemmer)
L038-002 BB Tip housing (Graco)
2) L038-007 Metal seal
3) L038-006 Gasket (standard)
L038-008 Lacquer Gasket (optional)
4) L038-*** Tip - see chart
3
2
1
4
Zip Tip
Big Barrel
Big Barrel Tip Features:
Fast Tip Size Changes - no tools required.
Versatility - Interchangeable with G big barrel tips.
Long Seal Life - withstands harsh solvents - won't swell or leak even in
severe abrasives - replaces in minutes.
Replacement Seal - is included with each new tip.
Venturi-Guard - less paint accumulation - helps protect against accidental
injection and prevents tip from slipping out of position.
Diffuser - safer unclogging in clean-out position.
Zip Tip Features:
Fast Tip Size Changes - no tools required.
Long Seal Life - withstands harsh solvents - won't swell or leak even with
small tips - replaces in minutes.
Tip Rotates Easily - even under “high pressure” clog-up.
Venturi-Guard - less paint accumulation - helps protect against accidental
injection and prevents tip from slipping out of position.
Patented Diffuser - safer unclogging in clean-out position.
How to Operate Parts Lists
To operate:
When tip plugs r otate the tip handle 180˚. Trigger the gun and line pressure
will purge clog.
Clean Position
Spray Position
To change tips:
Rotate tip 90˚.
Remove from housing.
Install new tip.
Rotate 90˚ to spray position.
To change seal assembly:
Relieve line pressure and set gun safety.
Remove tip housing from gun.
Remove tip from housing.
Press seal assembly with gasket out of housing. (On the Zip Tip type you can
use the tip as a tool for pressing).
Install tip into housing.
Lubricate and insert new seal ass'y through back of housing (press firmly to
insure seal is tight against tip shaft).
Insert gasket. Install unit on gun. Tighten gun nut.