Lemco
HDMOD-4 manual v1.0
9
3.3.2.3
DVB-T
In the “DVB-T” menu (Picture No5), “Lemco” app provides the ability to setup all the
necessary DVB-T parameters according to the standards, as follows:
Channel:
Select the desired output RF channel
Frequency:
Select the output RF channel frequency
Bandwidth:
Select the channel bandwidth
Constellation:
Select the channel constellation
Modulation:
Select the channel modulation mode
Guard interval:
Select the guard interval
Code Rate:
Select the desired code rate
(Picture No5)
3.3.2.4
Output Attenuator
In the “Output attenuator” (Picture No6) menu, “Lemco” app provides the ability to
increase/decrease the output level in steps of 10dB.
